What are the correct ways to use the air shower room? A air shower room is used as a blowing device for personnel to enter the clean area from the non-clean area. The dust on the body of the workshop has an isolation effect on the cleanliness of the workshop. The nozzle can be adjusted to effectively remove the dust on the human body and prevent external pollution from entering the clean area. So how is the correct operation and maintenance of the Shenzhen air shower room? The following introduces you one by one:

1. The air shower currently in use has been redesigned, using sound-controlled light-sensing automatic air shower room, the operation keys are touch-type, easy to use, and simple to operate.

2. Entering the air shower room must wait for the blower to completely stop before opening the inner door to enter the workshop, otherwise the interlocking device will be damaged if the door is forcibly pushed.

3. When the air shower door cannot be opened, the employees are asked to open and close the emergency stop. The doors on both sides can be opened after the power supply is disconnected. (The doors on both sides are opened at the end of get off work, which will not affect the cleanliness of the workshop, because the workshop maintains a certain positive pressure)

4. When there is no bypass channel between the purification workshop and the dressing room, when the worker is off work, the worker who comes out first can turn off the emergency stop switch of the air shower to stop the air shower room, and the off-duty personnel can pass the air shower. Extend the service life of the air shower room. When using, you can turn on the emergency stop switch again to return to the normal state. The emergency stop switch only needs to be touched lightly. Do not use too much force to avoid damage.
5. When you get out of the air shower, please use the handle of the air shower (or push the door frame). Do not push the glass of the air shower door by hand to prevent accidents.

6. The flow of air shower room strictly controls the entry and exit of production items, because the items.